image
  • This unit only has 93 hours of use. Most of these were training hours.
  • 120-gallon total airless paint application
  • The Chassis Engine is a Ford  2.5 liter fuel-injected gasoline. Ford Transmission (Ranger drivetrain = common/accessible parts).
  • The chassis Transmission is a Ford automatic 3-speed forward with one reverse
  • Either color to all guns
  • 5-Graco Paint guns
  • 5-Graco Bead guns
  • 2-Titan Speeflo High-pressure piston paint pumps
  • Sliding carriage, center, left or right of chassis striping.
  • Current model SMC solenoids
  • Two color unit
  • AC  ONLY
  • Low and high-pressure filters
  • Two ARO low-pressure diaphragm pumps (uninstalled)
  • MB 3001 timer system
  • Honda Auxiliary engine 24HP
  • V Twin Quincy air compressor
  • Two- 60-gallon paint tanks, cross-plumbed for the same color if wanted.
  • 720lb bead tank Vacuum bead fill WITH SHOP AIR
  • 20 Gallon ASME water/solvent tank
  • Graco camera guidance system with 2 cameras (not shown on pictures)
  • The unit has 2 very large diaphragm load pump/suction pumps, Never been used. Can bolt onto the unit – the frame rail.
  • Tanks are not heated.
  • Headlights, tail lights, turn signals. Windshield wiper on the cab.NOTE: Front wheel steer. (the next model up from what he has is a rear-wheel steer)
  • This unit is in 2007 and has later-model electronics.